[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the HTC Eye Android phone.

Disclaimer

FlexiSPY is not responsible for rooting the Android device in any way.  Before performing any of these steps make sure you back up your Android device completely. 

What is needed to root the HTC Eye?

In order to root the HTC Eye you will need the following.

• The HTC Eye you wish to root
• A PC

Step 1 – Set up the Android SDK environment on your PC

Before you can run the rooting tools on your PC to root the Eye you must first set up the Android development environment correctly.

In order to use Fastboot to root the HTC Eye you must have the Android SDK downloaded and installed on to your computer.

You can download the SDK from here.

Step 2 – Unlock the bootloader of the HTC Eye

In order to root the phone you first must unlock the bootloader of the HTC Eye

To do this you need to visit the HTC website which is located here.  Follow the steps to unlock the bootloader and, when you have done that successfully please proceed to the next step.

Step 3 – Download the HTC Eye custom recovery

In order to root the phone you simply download a root file to your PC which you can get here.  Once downloaded save it and extract it to an easy to access location on your PC such as the desktop.

Step 4 – Download SuperSU

Connect the HTC Eye to your computer and download the SuperSU APK file from here and save it to your computer desktop.  Once saved on your computer, copy it to the connected device.

Step 5 – Boot the HTC Eye into Fastboot mode

In order to run the root file you must boot the HTC Eye in to bootloader mode which is done as follows:

1. Make sure the HTC Eye is turned off completely.
2. Hold down the volume down key and the power button until the phone starts up and it will be in bootloader mode. Use the Volume Up and Volume down buttons to select Fastboot and press the Power button to confirm
3. When the phone is in Fastboot mode connect it to your PC.

Step 6 – Flash the custom recovery to the HTC Eye

With the phone in Fastboot mode and it being connected to the PC do the following:

• On your PC navigate to where you installed the Android SDK to from step 1 and go into the Platform-Tools folder where you will see exe.
• Hold down the shift key and right-click in the window and choose Open Command Window Here
• In the command window that appears type fastboot flash recovery recovery.img and press Enter to flash the custom recovery file from step 3 to the device. When that has completed disconnect the device from your computer.

Step 7 – Root the HTC Eye

You now need to put the HTC Eye in custom recovery mode.

1. Make sure the HTC Eye is turned off completely.
2. Hold down the volume down key and the power button until the phone starts up and it will be in bootloader mode. Use the Volume Up and Volume down buttons to select Recovery and press the Power button to confirm
3. When the device boots in to recovery mode choose Install and browse to the SuperSU zip file you copied to the device in step 4.
4. Once that has been flashed successfully restart the device.

You should now see SuperSU is installed as a new application which means that the HTC Eye is now rooted.

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the HTC Desire 310 Android phone.

Disclaimer

 FlexiSPY is not responsible for rooting the Android device in any way.  Before performing any of these steps make sure you back up your Android device completely. 

What is needed to root the HTC Desire 310?

In order to root the HTC Desire 310 you will need the following.

• The HTC Desire 310 you wish to root
• A PC

Step 1 – Enable USB debugging on the HTC Desire 310

The first thing to do it enable USB debugging on the device which you can do by going to Settings > Developer Options.

Go to Settings > About Phone and tap the Build Number button until Developer Options are enabled.

Once done you go to Settings > Developer Options make sure the USB debugging option is checked.

Step 2- Install the USB drivers on your PC for the HTC Desire 310

Download the USB drivers from here.  Save them to an easy to find location on your PC, such as the desktop and then run the installation file to install the drivers.

Once the USB drivers are installed connect the device to your PC.

Step 3 – Download the root tool

Download the root tool for the HTC Desire from here.  Save the program to an easy to find location on your PC on your desktop and then run it.

Step 4 – Root the HTC Desire 310

With the USB drivers installed and the device connected to your PC you should have run the rooting program (Root Genius) and once it has detected the device click the Root button.

Wait for the process to finish.

Once this is done disconnect the device from your PC and the device will now be rooted.

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the HTC Desire 816 Android phone.

Disclaimer

 FlexiSPY is not responsible for rooting the Android device in any way.  Before performing any of these steps make sure you back up your Android device completely.  These steps are correct at the time of writing but rooting is done at your own risk at your own responsibility and FlexiSPY is not responsible in any way.

What is needed to root the HTC Desire 816?

In order to root the HTC Desire 816 you will need the following.

• The HTC Desire 816 you wish to root
• A PC

Step 1 – Install a custom recovery

Before you can root the device it must be running a custom recovery.  To do this you must first enable USB debugging on the device.  We discuss how to do that here.

Once you have enabled USB Debugging we are ready to install the custom CWM recovery.

The first thing you have to do is download the file needed to install the custom recovery to your PC which you can get from here.

Save the zip file to an easy to find location on your computer such as your desktop and extract it to its own folder.

You now need to unlock the bootloader of the HTC Desire 816 and we explain how to do that here.

If you have not yet installed the USB drivers on your PC for the HTC Desire 816 and configured the Android SDK on your PC then please read the article here as this is needed for you to continue.

You now need to put the device in to HBoot mode.

• Make sure the phone is turned off completely.
• Hold the Power button and the Volume Down button together and wait for the phone to boot up.
• When the Hboot menu appears choose Fastboot from the options (use Volume up and Volume down to select and Power to confirm).

Connect the HTC Desire 816 to your PC and then navigate to the folder where you extracted the custom recovery zip file to.

Double-click the .exe file to start the custom recovery installation process and follow the steps that appear on-screen.

Now that the phone has had a custom recovery installed we are ready to root the phone.

Step 2 – Root the phone

Let the HTC Desire 816 boot up completely and make sure it is still connected to your PC.

On your PC download the SuperSU zip file needed to root the device which you can get here.  Save it to an easy to find location such as your desktop but do not extract it.

Instead copy the downloaded SuperSU zip file to the HTC Desire 816 in a convenient location such as the Downloads folder.

Once done, disconnect the phone from your PC.

It is now time to put the device in to Hboot mode again.

• Make sure the phone is turned off completely.
• Hold the Power button and the Volume Down button together and wait for the phone to boot up.
• When the Hboot menu appears choose Recovery from the options (use Volume up and Volume down to select and Power to confirm).

With the HTC Desire 816 in recovery mode (this is why we had to install the custom recovery first) tap Install Zip from Sdcard and then tap Choose zip from Sdcard and navigate to the SuperSU zip file you copied to the device and select it.

Wait for the SuperSU zip file to be flashed to the device.

When it is done tap Reboot System Now.

When the HTC Desire 816 boots up again look in the Apps drawer and you should see SuperSU which means that the device has been successfully rooted

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the HTC One Mini 2 Android phone.

Disclaimer

FlexiSPY is not responsible for rooting the Android device in any way. Before performing any of these steps make sure you back up your Android device completely. These steps are correct at the time of writing but rooting is done at your own risk at your own responsibility and FlexiSPY is not responsible in any way.

What is needed to root the HTC One Mini 2?

In order to root the HTC One Mini 2 you will need the following.

• The HTC One Mini 2 you wish to root
• A PC

Step 1 – Download the HTC USB drivers and install them on to your PC

You must download and install the USB drivers for your device on to your PC. You can get them from here. Save the file to your PC and install it to install the drivers.

Step 2 – Unlock the HTC One Mini 2 bootloader

Before you can root the device you must unlock the bootloader. We explain how to do that here.

Step 3 – Download Fastboot

Download Fastboot and save it to your PC. Save it to an easy to find location on your PC such as the desktop. You can get it from here.

Step 4 – Download the TWRP custom recovery

You must flash a custom recovery to the device in order to root it. You can get it from here. Save the file to your desktop. When downloaded rename the file so that it is called recovery.img.

Step 5 – Download SuperSU

Download SuperSU from here. Save it the desktop of your PC. Do not extract it.

Step 6 – Enable USB debugging on the HTC One Mini 2

On the device go to Menu > Settings > Developer options > USB debugging and make sure the option is checked.

Step 7 – Copy SuperSU to the HTC One Mini 2

Now that the device has USB debugging enabled connect it to your PC (tap Yes on the device when asked) and then copy the SuperSU zip file from step 4 to an easy to find location on the device such as the Downloads folder.

Step 8 – Install the custom recovery

On your PC desktop hold down the Shift key and right-click and click Open a command window here.

In the command window that appears type the following and press Enter when done.

adb reboot bootloader

The device should reboot in to the bootloader.

Use the Volume Up and Volume Down buttons to select the Fastboot option and select it with the Power button.

On your PC, in the command window, type the following and press Enter when done.

fastboot boot recovery.img

The device should boot in to the custom recovery mode using the file you downloaded and renamed from step 3.

Step 9 – Root the device

With the device booted in to custom recovery tap Install and then browse to the SuperSU zip file you copied to the device in step 6.

Tap on Swipe to confirm Flash.

Once the file has been flashed reboot your device by tapping Reboot and then System.

Once the device reboots you should now see SuperSU installed as a new application meaning that you have successfully rooted the device.

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the HTC Droid DNA Android phone.

What is needed to root the HTC Droid DNA?

In order to root the HTC Droid DNA you will need the following.

Step 1 – Set up the Android SDK environment on your PC

Before you can run the rooting tools on your PC to root the HTC Droid DNA you must first set up the Android development environment correctly and install the USB drivers for your phone on your PC.

You can read more about how to do that here.

Step 2 – Unlock the bootloader of the HTC Droid DNA

In order to root the phone you first must unlock the bootloader of the HTC Droid DNA

You can review the article here for more information.

Step 3 – Download the required files

In order to root the phone you must use Fastboot which you can download from here. Once downloaded extract the files to your desktop.

You must also download the custom recovery file from here. Save this to an easy to find location such as your desktop. Extract the file and it should be called recovery.img. If it is not called this please rename it so that it matches.

Finally, download the SuperSU zip file from here and save it to an easy to find location also, again, such as the desktop.

Step 4 – Root the HTC Droid DNA

Now that you have set up the Android SDK environment, unlocked the HTC Droid DNA bootloader, installed the HTC PC drivers and downloaded the fastboot files it is time to root the phone.

The first thing to do is reboot the HTC Droid DNA in to Fastboot mode.

Select the Fastboot option listed on the phone screen.

With the HTC Droid DNA now in Fastboot mode connect the phone to your PC.

Open up a command prompt window. To do this navigate to the folder you extracted the Fastboot files to and then press and hold shift and click an empty area of the screen and choose Open command window here when asked.

In the command prompt window that appears type the following command and press Enter:

fastboot flash recovery recovery.img

Wait for it to finish and then run the next command:

fastboot reboot

The HTC Droid DNA should reboot in to normal mode again.

Make sure that the HTC Droid DNA is now connected to your PC after it boots up and copy the SuperSU zip file to an easy to find location on the phone such as the Downloads folder.

Disconnect the phone from the PC and then enable USB debugging.

To do this, on the phone itself, go to Menu > Settings > Developer Options > USB Debugging and make sure the option is enabled.

If you do not see the Developer Options menu go to Menu > Settings > About and tap the Build Number option until it says you are a developer.

With USB Debugging now enabled connect the HTC Droid DNA back to your PC.

Again, open up a command prompt window. To do this navigate to the folder you extracted the Fastboot files to and then press and hold shift and click an empty area of the screen and choose Open command window here when asked.

In the command window that appears type the following command and press Enter.

adb reboot recovery

The device will boot into recovery mode

Once done you will now see the SuperSU application which means that you have successfully rooted the HTC Droid DNA.

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the popular HTC One M7 phone from HTC.

What is needed to root the HTC One M7?

In order to root the HTC One M7 you will need the following.

Step 1 – Download the root file

In order to root the HTC One M7 you must first download the rooting zip file which you can get from here. Once you have downloaded it save it to an easy to access location such as your desktop and extract it to its own folder.

Step 2 – Unlock the HTC One M7 bootloader

As with many Android phones you must unlock the bootloader first before rooting can take place. This is done as follows:

Step 3 – Enable USB debugging on the HTC One M7

On the phone itself you now need to enable USB debugging.

On the phone go to Settings > Developer Options and turn make sure USB Debugging is checked.

To enable USB debugging go to Settings > About > Software Information and tap Build Number until developer mode is enabled.

Step 4 – Continue unlocking the bootloader

Now that USB debugging is enabled connect the HTC One M7 to your PC and have the toolkit running and perform the following.

Step 5 – Root the HTC One M7

Now that the bootloader has been unlocked we can root the HTC One M7. When you have done that disconnect the HTC One M7 from your PC.

Once you have done that you need to put the phone in to bootloader mode.

With the HTC One M7 now in Fastboot mode plug it back in to your PC.

Go to the root file that you downloaded in step 1 and make you have extracted it.

Double-click the install-superboot-windows.bat file and then follow the instructions.

Once rooting has been done successfully you will see the SuperSU icon on the HTC One M7 meaning that you have rooted the phone successfully

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the popular HTC One M8.

What is needed to root the HTC One M8?

In order to root the HTC One M8 you will need the following.

Step 1 – Download and install the rooting toolkit

In order to root the HTC One M8 you must first download the rooting toolkit which you can get from here. Once you have downloaded it save it to an easy to access location such as your desktop and extract it to its own folder.

Step 2 – Unlock the HTC One M8 bootloader

As with many Android phones you must unlock the bootloader first before rooting can take place. This is done as follows:

Step 3 – Enable USB debugging on the HTC One M8

On the phone itself you now need to enable USB debugging.

On the phone go to Settings > Developer Options and turn make sure USB Debugging is checked.

To enable USB debugging go to Settings > About > Software Information and tap Build Number until developer mode is enabled.

Step 4 – Continue unlocking the bootloader

Now that USB debugging is enabled connect the HTC One M8 to your PC and have the toolkit running and perform the following.

Step 5 – Root the HTC One M8

Now that the bootloader has been unlocked we can root the HTC One M8. With the HTC One M8 still connected to your PC and the toolkit still open and running do the following:

The HTC One M8 will reboot and you will now see the SuperSU icon meaning that the phone has been successfully rooted.

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the HTC One S Android phone.

What is needed to root the HTC One S?

In order to root the HTC One S you will need the following.

Step 1 – Set up the Android SDK environment on your PC

Before you can run the rooting tools on your PC to root the One S you must first set up the Android development environment correctly.

In order to use Fastboot to root the HTC One S you must have the Android SDK downloaded and installed on to your computer.

You can download the SDK from here.

Step 2 – Unlock the bootloader of the HTC One S

In order to root the phone you first must unlock the bootloader of the HTC One S.

To do this you need to visit the HTC website which is located here. Follow the steps to unlock the bootloader and, when you have done that successfully please proceed to the next step.

Step 3 – Download the HTC One S root file

In order to root the phone you need to download the root file which you can get here. Make sure, once downloaded you save the zip file to an easy to remember location such as your desktop.

Step 4 – Enable USB debugging on the HTC One S

So that your PC recognises the HTC One S for rooting you need to enable USB debugging mode which is done as follows:

Step 5 – Boot the HTC One S into Bootloader mode

In order to run the HTC One S root file from step 3 you must boot the HTC One S in to bootloader mode which is done as follows:

Step 6 – Root The Phone

With the HTC One S in Fastboot mode simply browse to the folder you extracted in step 3 and run the install-superboot-windows.bat file. When the phone reboots you will now see the SuperSU icon which means that you have successfully rooted the HTC One S.

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the HTC Evo 3D Android phone.

What is needed to root the HTC Evo 3D?

In order to root the HTC Evo 3D you will need the following.

Step 1 – Set up the Android SDK environment on your PC

Before you can run the rooting tools on your PC to root the HTC Evo 3D you must first set up the Android development environment correctly.

In order to use Fastboot to root the HTC Evo 3D you must have the Android SDK downloaded and installed on to your computer.

You can download the SDK from here.

Step 2 – Unlock the bootloader of the HTC Evo 3D

In order to root the phone you first must unlock the bootloader of the HTC Evo 3D

To do this you need to visit the HTC website which is located here. Follow the steps to unlock the bootloader and, when you have done that successfully please proceed to the next step.

Step 3 – Download the S-off root files

In order to root the phone you must use S-off which you can download from here. Once downloaded extract the files to your desktop.

Step 4 – Download the HTC PC drivers

So that the HTC Evo 3D is seen properly when you connect it to your PC you need to install the correct USB drivers which you can get from here. Once you have downloaded the drivers double-click the executable file to start the driver installation process.

Step 5 – Root the HTC Evo 3D

Now that you have set up the Android SDK environment, unlocked the HTC Evo 3D bootloader, installed the HTC PC drivers and downloaded the S-off files it is time to root the phone.

The first you must do is enable USB debugging on the HTC Evo 3D. To do this, on the phone, go to Menu > Settings > Developer Options > USB debugging and make sure the USB debugging option is checked.

If you do not see the Developer Options menu go to Settings > About Phone and tap the Build Number option until you are told you are now a developer.

Now you need to connect the HTC Evo 3D to your PC and do the following:

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the HTC Desire 300 Android phone.

What Is Needed To Root The HTC Desire 300?

In order to root the HTC Desire 300 you will need the following.

Step 1 – Set Up The Android SDK Environment On Your PC

Before you can run the rooting tools on your PC to root the HTC Desire 300 you must first set up the Android development environment correctly.

You can download the SDK from here.

Please also remember to download the correct USB drivers for the HTC Desire also so that it is recognised by your PC when you plug it in.

Step 2 – Unlock The Bootloader Of The HTC Desire 300

In order to root the phone you first must unlock the bootloader of the HTC Desire 300.

To do this you need to visit the HTC website which is located here. Follow the steps to unlock the bootloader and, when you have done that successfully please proceed to the next step.

Step 3 – Download Clockworkmod Recovery

In order to install SuperSU and root the phone you must first install the popular Clockworkmod recovery environment. You can download it from here. Once it has been downloaded extract to the Android SDK folder you have already installed (where the ADB file is found). Make sure see a file called recovery.img after extraction.

Step 4 – Root The HTC Desire 300

Now that you have set up the Android SDK environment, unlocked the HTC Desire 300 bootloader and downloaded the Clockworkmod zip file we are ready to root the phone.

The second thing you must do is put the HTC Desire 300 in to Fastboot mode.

Step 5 – Install SuperSU

Once Clockworkmod has been flashed to the HTC Desire 300 restart the phone. Make sure that the HTC Desire 300 is connected to your PC and copy the downloaded SuperSU zip file from here to the SD card of the phone (e.g. the Downloads folder).

You now need to boot the phone in to recovery mode.

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the HTC Droid Incredible Android phone.

What is needed to root the HTC Droid Incredible?

In order to root the HTC Droid Incredible you will need the following.

Step 1 – Set up the Android SDK environment on your PC

Before you can run the rooting tools on your PC to root the HTC Droid Incredible you must first set up the Android development environment correctly.

In order to use Fastboot to root the HTC Droid Incredible you must have the Android SDK downloaded and installed on to your computer.

You can download the SDK from here.

Step 2 – Unlock the bootloader of the HTC Droid Incredible

In order to root the phone you first must unlock the bootloader of the HTC Droid Incredible.

To do this you need to visit the HTC website which is located here. Follow the steps to unlock the bootloader and, when you have done that successfully please proceed to the next step.

Step 3 – Download Clockworkmod recovery

In order to install SuperSU and root the phone you must first install the popular Clockworkmod recovery environment. You can download it from here. Once it has been downloaded extract to the Android SDK folder you have already installed (where the ADB file is found). Make sure see a file called recovery.img after extraction.

Step 4 – Root the HTC Droid Incredible

Now that you have set up the Android SDK environment, unlocked the HTC Droid Incredible bootloader and downloaded the Clockworkmod zip file we are ready to root the phone.

The second thing you must do is put the HTC Droid Incredible in to Fastboot mode.

Step 5 – Install SuperSU

Once Clockworkmod has been flashed to the HTC Droid Incredible restart the phone. Make sure that the HTC Droid Incredible is connected to your PC and copy the downloaded SuperSU zip file from here to the SD card of the phone (e.g. the Downloads folder).

You now need to boot the phone in to recovery mode.

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the HTC One V Android phone.

What is needed to root the HTC One V?

In order to root the HTC One V you will need the following.

Step 1 – Set up the Android SDK environment on your PC

Before you can run the rooting tools on your PC to root the One V you must first set up the Android development environment correctly.

In order to use Fastboot to root the HTC One V you must have the Android SDK downloaded and installed on to your computer.

You can download the SDK from here.

Step 2 – Unlock the bootloader of the HTC One V

In order to root the phone you first must unlock the bootloader of the HTC One V

To do this you need to visit the HTC website which is located here. Follow the steps to unlock the bootloader and, when you have done that successfully please proceed to the next step.

Step 3 – Download the Fastboot image file

In order to root the phone you must flash an image file to the HTC One V using Fastboot. You can download the image file from here. Once downloaded save it and extract it to an easy to access location on your PC such as the desktop.

Step 4 – Enable USB debugging on the HTC One V

So that your PC recognises the HTC One V for rooting you need to enable USB debugging mode which is done as follows:

Step 5 – Boot the HTC One V into Bootloader mode

In order to run the root file you must boot the HTC One V in to bootloader mode which is done as follows:

Step 6 – Root the HTC One V

With the phone in bootloader mode and it being connected to the PC simply navigate to the Fastboot file you downloaded in step 3 and run the install-superboot-windows file and then the phone will be rooted.

Once the process has been completed disconnect it from your PC. Once it restarts you will see the SuperSU icon meaning you have successfully rooted the HTC One V phone.

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the HTC Wildfire S Android phone.

What is needed to root the HTC Wildfire S?

In order to root the HTC Wildfire S you will need the following.

Step 1 – Set up the Android SDK environment on your PC

Before you can run the rooting tools on your PC to root the HTC Wildfire S you must first set up the Android development environment correctly.

You can download the SDK from here.

Step 2 – Unlock the bootloader of the HTC Wildfire S

In order to root the phone you first must unlock the bootloader of the HTC Wildfire S.

To do this you need to visit the HTC website which is located here. Follow the steps to unlock the bootloader and, when you have done that successfully please proceed to the next step.

Step 3 – Download the HTC Wildfire S root files

In order to root the phone you need to download the root files which you can get here (image file)and here (root script).Make sure, once downloaded you save the zip files to an easy to remember location such as your desktop.

Step 4 – Enable USB debugging on the HTC Wildfire S

So that your PC recognizes the HTC Wildfire S for rooting you need to enable USB debugging mode which is done as follows:

Step 5 – Copy the root files to the HTC Wildfire S

To root the HTC Wildfire S you need to copy the root files to the phone. Simply connect the phone to your PC and transfer the root files from step 3 to the SD card in an easy to remember location such as the Downloads folder.

Step 6 – Disable Fastboot on the HTC Wildfire S

On the phone go to Menu > Settings > Power > Fastboot and turn off the Fastboot option.

Step 7 – Install the Clockworkmod recovery image

To root the phone it must be in bootloader mode. To get this mode please do the following:

Step 8 – Root the phone

To root the phone please do the following:

When the phone reboots you will see the SuperSU icon meaning that you have successfully rooted the HTC Wildfire S.

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

This guide will show you how to root the HTC One X Android phone.

What is needed to root the HTC One X?

In order to root the HTC One X you will need the following.

Step 1 – Set Up The Android SDK Environment On Your PC

Before you can run the rooting tools on your PC to root the One X you must first set up the Android development environment correctly.

In order to use Fastboot to root the HTC One X you must have the Android SDK downloaded and installed on to your computer.

You can download the SDK from here.

Step 2 – Unlock The Bootloader Of The HTC One X

In order to root the phone you first must unlock the bootloader of the HTC One X

To do this you need to visit the HTC website which is located here. Follow the steps to unlock the bootloader and, when you have done that successfully please proceed to the next step.

Step 3 – Download The HTC One X Root File

In order to root the phone you simply download a root file to your PC which you can get here. Once downloaded save it and extract it to an easy to access location on your PC such as the desktop.

Step 4 – Enable USB Debugging On The HTC One X

So that your PC recognizes the HTC One X for rooting you need to enable USB debugging mode which is done as follows:

When the root process has been finished disconnect your phone from the PC and then look for the Superuser application which means that it has been rooted successfully.

Step 5 – Boot The HTC One X Into Bootloader Mode

In order to run the root file you must boot the HTC One X in to bootlader mode which is done as follows:

Step 6 – Root The HTC One X

With the phone in bootloader mode and it being connected to the PC simply navigate to the HTC One X root folder you downloaded and extracted in step 3 and run the root.bat file and then the phone will be rooted.

Once the process has been completed disconnect it from your PC. Once it restarts you will see the SuperSU icon meaning you have successfully rooted the HTC One X phone.

[box type=”warning”] We no longer maintain rooting guides on our blog. This means that your phone might not be compatible with this guide. If you’re not sure, please consult our rooting team, who will root your phone, and install FlexiSPY for you, for a fee.
Click here to learn more about our rooting service[/box]

The HTC One is one of HTC’s most popular flagship Android models, in the following guide you’ll learn how to Root it.

What is needed to root the HTC One?

To root the HTC One you will need the following.

Step 1 – Unlock the HTC One bootloader

To root the HTC One you first need to go to the HTC website and unlock the bootloader of the phone. Until you do that rooting cannot take place.

You can start the bootloader unlock process here.

Essentially what happens is that you have to connect the HTC One to your PC and use Fastboot to execute a command to get a unique ID that you then type in to the HTC website above to generate a bootloader unlock code that, on the PC (with the HTC One still connected) you enter to then unlock the bootloader.

Full details of the entire process are given on the HTC website above.

Step 2 – Install TWRP recovery on to the HTC One

In order to install SuperSU and root the HTC One you must install TWRP recovery on to the device first. This can only be done if you have successfully unlocked the HTC One bootloader in the previous step.

You can download TWRP from here. Make sure to choose the correct HTC One variant from the list.

You need to save the TWRP file on to the HTC One in the same place that you saved the Fastboot and ADB files from step 1 when you unlocked the bootloader.

After you have downloaded the TWRP recovery file rename it so it is called TWRP.img – you will need this file later.

Step 3 – Use Fastboot to flash TWRP to the HTC One

You need to first put the HTC One in Fastboot mode.

To do this follow these steps.

Step 4 – Root the HTC One

Now that you have successfully unlocked the HTC One bootloader and flashed the TWRP image file to the phone it is time to root the phone.

To do this you first need to download the SuperSU zip file which is located here.

Save this to your computer in a safe place.

Connect the HTC One to your PC and copy the SuperSU zip file you just downloaded to the HTC One (for example, to the Downloads folder).

Once you have done that turn off the HTC One completely. It is time to flash SuperSU and root the phone which is done using the following steps.

Once the HTC One reboots, to verify the phone has been rooted properly, simply look for the SuperSU application icon. Once you see this you have successfully rooted the HTC One.